We offer a $15 flat rate Australia-wide shipping service, no matter how many items, however large or heavy items may incur a higher freight charge. If your item/s is subject to additional freight charges due to being large or heavy, this will be calculated at checkout. If any damage occurs during shipping, it is the responsibility of the customer to notify us within 24 hours of the order arriving. This is a requirement of our freight insurance and we are unable to lodge any claims after 24 hours from delivery.
Small, efficient and uncompromisingly stable – the M ONE X – 24V Edition is a highly compact monoblock for subwoofer applications. Designed from latest Class D technology this tiny amp can easily control speakers with 1 Ohm impedance. Its current capability makes the M ONE X – 24V Edition a perfect partner for 2 x 2 Ohms subwoofers, where both voice coils are connected in parallel. And for even more output power, two M ONE X – 24V Edition amplifiers can be combined to one single powerhouse – thanks to the TwinPower Link.
In addition a comprehensive and stunningly practical feature set leaves nothing to be desired. Last but not least installation will be a no-brainer due to the minimal dimensions.
The latest generation of OE car radios incorporates sophisticated possibilities of diagnosing the connected speakers. If a common amplifier will be hooked up failure messages and loss of specific features (e.g. fader function) quite often appear - but not with the M ONE X - 24V Edition.
The new ADEP circuit (Advanced Diagnostics Error Protection) avoids all these problems without loading the speaker outputs of the OE radio during high volumes unnecessarily.
The switched power supply of the HELIX M ONE X - 24V Edition assures operation even if the battery’s voltage drops down to 12 Volts during engine crank.
Power RMS ≤ 1% THD+N |
Normal operation (One amplifier) |
TwinPower Link (Two amplifiers) |
- @ 4 Ohms |
1 x 400 Watts |
1 x 1,400 Watts |
- @ 2 Ohms |
1 x 700 Watts |
1 x 2,060 Watts |
- @ 1 Ohm |
1 x 1,030 Watts |
- |
- bridged @ 4 Ohms |
- |
- |
- bridged @ 2 Ohms |
- |
- |
Max. output power per channel*: |
Up to 1,180 Watts RMS @ 1 Ohm |
|
Amplifier technology |
Class D |
|
Inputs |
2 x RCA / Cinch 2 x Highlevel speaker input 1 x Remote In 1 x Remote control input |
|
Input sensitivity |
RCA / Cinch 0.5 - 6 Volts Highlevel 1.1 - 13 Volts |
|
Input impedance RCA / Cinch |
20 kOhms |
|
Input impedance highlevel |
9 - 33 Ohms |
|
Outputs |
1 x Speaker output |
|
Output voltage RCA / Cinch |
- |
|
Signal converter for digital input |
- |
|
Frequency response |
10 Hz - 250 Hz |
|
Bass boost |
0 - 12 dB / 30 - 80 Hz |
|
Highpass |
- |
|
Lowpass |
50 Hz - 250 Hz adjustable |
|
Bandpass |
10 Hz - 250 Hz adjustable |
|
Subsonic |
10 Hz - 50 Hz adjustable |
|
Phase |
0 - 180° adjustable |
|
Slope high- / lowpass |
- |
|
Slope subsonic / lowpass |
12 / 24 dB/Oct. |
|
Signal-to-noise ratio digital input |
- |
|
Signal-to-noise ratio analog input |
95 dB (A-weighted) |
|
Distortion (THD) |
0.20 % |
|
Damping factor |
150 |
|
Operating voltage |
18 - 36 Volts (max. 5 sec. down to 12 Volts) |
|
Idle current |
400 mA |
|
Operating temperature range |
-40° C to +70° C |
|
Fuse |
3 x 20 A Maxi-fuse (APX) |
|
Power rating |
DC 24 V ⎓ 53 A max. |
|
Additional features |
Active, adjustable crossover, bass boost, phase shift, Start-Stop capability, highlevel input with automatic turn on function and Advanced Diagnostics Error Protection (ADEP), bass volume cable remote control |
|
Dimensions (H x W x D) |
50 x 320 x 154 mm 2.00 x 12.60 x 6.06” |
|
For more information, please visit the manufacturer's website.
We offer a $15 flat rate Australia-wide shipping service, no matter how many items, however large or heavy items may incur a higher freight charge. If your item is subject to additional freight charges, this will be communicated to you when your order is processed. You are able to cancel your order and receive a full refund if you do not accept the additional freight charges. If any damage occurs during shipping, it is the responsibility of the customer to notify us within 24 hours of the order arriving. This is a requirement of our freight insurance and we are unable to lodge any claims after 24 hours from delivery.
For express shipping, we offer a $30 flat rate Australia-wide shipping, however, larger/heavier items and remote areas may incur additional/higher fee which will be communicated with you at the time of processing your order.
Any order can be picked up in-store, located at 9 Strathaird road Bundall 4217, during our regular business hours for no freight or handling fees. We request 2-4 business to process the order but often will have it ready in less time. For security reasons, when picking up in-store you must present photo ID if you have paid online via credit card. The card holder must be the person picking up the order.
Unfortunately, GCCS are unable to ship to PO Boxes or Parcel Lockers for insurance reasons at this time, an alternate shipping option may be offered. Additional fees may be applicable.
GCCS do not ship internationally at this time.
All products sold by GCCS come with a minimum 12 month warranty as stipulated by Australian consumer law. If your product is defective please contact us to organise the return of the item. All products are sent back to the manufacturer for assessment and either repair or replacement. Manufacturers can take up to four weeks for goods to be repaired. All goods are subject to the manufacturers terms and conditions for repair or replacement. Please contact us for further information. Any unopened item can be returned within 30 days of delivery for a refund less 20% re-stocking fee and freight costs. If the item has been opened, unpacked or used please advise us to discuss options. GCCS will pay freight charges on any orders returned if the order is the result of our error. Refunds are paid back to you by the same method of payment for that order. Refunds can take 48-72 hours after the item has been received by our store. To organise the return of an item, please contact us before sending the item to ensure prompt service.