Purchase
If you are interested in buying this item please contact us via our contact page.
We offer a $15 flat rate Australia-wide shipping service, no matter how many items, however large or heavy items may incur a higher freight charge. If your item/s is subject to additional freight charges due to being large or heavy, this will be calculated at checkout. If any damage occurs during shipping, it is the responsibility of the customer to notify us within 24 hours of the order arriving. This is a requirement of our freight insurance and we are unable to lodge any claims after 24 hours from delivery.
The DBA 201 F flat active subwoofer enclosure optimized with FEM simulation ensures superior performance, maximizing the subwoofer output with a super flat size. The massive magnet of the 8 in. driver provides optimal control during the highest cone excursion.
The built-in 24 dB/Oct. low-pass crossover filter with a variable cutting corner frequency (50÷150 Hz) allows you to perfectly match the DBA 201 F to your speaker system. Adjustable bass boost (0÷6 dB @ 45Hz) can add bass output as you prefer, allowing correction for OEM sound equalization. With the phase inverter (0-180°), you can optimize phase alignment between the DBA 201 F and your speaker system, regardless of the subwoofer’s position in the car. The subsonic filter (15 Hz @ 24 dB/Oct) protects the cone from over-excursion and amplifiers from overheating. The input sensitivity control is the perfect tool to maximize the overall system output level while preventing clipping.
The built-in audio sense circuit allows the DBA 201 F to turn on and timeout to standby mode automatically. You can switch off the audio sense function when a remote turn-on wire is available.
DBA 201 F level can be adjusted (-15 dB ÷ 0 dB) using the new stylish HRC 01 remote control. HRC 01 AS control is ready for tape surface mounting, screw surface mounting, and recessed mounting, thanks to the provided accessories.
Technical Specs |
|
Size mm (in.) |
200 (8) |
Power Handling - Continuous W |
220 |
Power Handling - Peak W |
440 |
Impedance Ohm |
0.4 |
Design |
Super Flat Sealed |
Voice Coil Ø |
38.6 (1.52) mm (in.) |
Frequency Response Hz |
32 ÷ 400 |
Magnet size D x d x h mm (in.) |
110 x 45 x 17 (4.33 x 1.78 x 0.67) |
Weight of one component kg (lb.) |
4.3 (9.48) |
Magnet |
High Density Flux Ferrite |
Cone |
Pressed paper |
Voice Coil Type |
Copper |
Amplifier Stage |
|
Distortion - THD @ 100 Hz % |
0.15 |
Bandwidth Hz |
15 - 150 |
S/N ratio dBA |
100 |
Output power (RMS) @ 14,4 VDC, 1% THD W |
220 |
Power Supply |
|
Operating voltage VDC (Fuse) |
6.5 ÷ 18 (15A) |
Start - Stop voltage VDC |
6 |
Idling current A (Power OFF) |
260 m (1 m) |
Consumption @ 14,4 VDC Max musical power A |
8.5 |
Remote IN Turn on VDC (Current) |
4 (1 mA) |
PRE input signal Turn ON VRMS |
10 mV |
SPK input DC Turn ON VDC |
2 |
Signals Inputs / Filter |
|
PRE input signal VRMS (impedance) |
0.2 ÷ 5 (10kΩ) |
SPK input signal VRMS (impedance) |
1.2 ÷ 30 (6Ω) |
LO-PASS Filter @ 24 dB Oct adjustable Hz |
50 ÷ 150 |
Subsonic Filter @ 24 dB Oct Fixed Hz |
15 |
Phase switch |
0 / 180° |
Bass Boost @45 Hz dB |
0 ÷ 6 |
Sub remote volume control dB |
0 ÷ -15 (HRC 01 included) |
For more information, please visit the manufacturer's website.
We offer a $15 flat rate Australia-wide shipping service, no matter how many items, however large or heavy items may incur a higher freight charge. If your item is subject to additional freight charges, this will be communicated to you when your order is processed. You are able to cancel your order and receive a full refund if you do not accept the additional freight charges. If any damage occurs during shipping, it is the responsibility of the customer to notify us within 24 hours of the order arriving. This is a requirement of our freight insurance and we are unable to lodge any claims after 24 hours from delivery.
For express shipping, we offer a $30 flat rate Australia-wide shipping, however, larger/heavier items and remote areas may incur additional/higher fee which will be communicated with you at the time of processing your order.
Any order can be picked up in-store, located at 9 Strathaird road Bundall 4217, during our regular business hours for no freight or handling fees. We request 2-4 business to process the order but often will have it ready in less time. For security reasons, when picking up in-store you must present photo ID if you have paid online via credit card. The card holder must be the person picking up the order.
Unfortunately, GCCS are unable to ship to PO Boxes or Parcel Lockers for insurance reasons at this time, an alternate shipping option may be offered. Additional fees may be applicable.
GCCS do not ship internationally at this time.
All products sold by GCCS come with a minimum 12 month warranty as stipulated by Australian consumer law. If your product is defective please contact us to organise the return of the item. All products are sent back to the manufacturer for assessment and either repair or replacement. Manufacturers can take up to four weeks for goods to be repaired. All goods are subject to the manufacturers terms and conditions for repair or replacement. Please contact us for further information. Any unopened item can be returned within 30 days of delivery for a refund less 20% re-stocking fee and freight costs. If the item has been opened, unpacked or used please advise us to discuss options. GCCS will pay freight charges on any orders returned if the order is the result of our error. Refunds are paid back to you by the same method of payment for that order. Refunds can take 48-72 hours after the item has been received by our store. To organise the return of an item, please contact us before sending the item to ensure prompt service.