10-inch (25cm) Powered Subwoofer
Amplifier Power: 1200 watts RMS
Dimensions: 362 x 343 x 419mm
Black Ash finish
$15 Flat rate shipping*
We offer a $15 flat rate Australia-wide shipping service, no matter how many items, however large or heavy items may incur a higher freight charge. If your item/s is subject to additional freight charges due to being large or heavy, this will be calculated at checkout. If any damage occurs during shipping, it is the responsibility of the customer to notify us within 24 hours of the order arriving. This is a requirement of our freight insurance and we are unable to lodge any claims after 24 hours from delivery.
JL AUDIO 10-inch Powered Subwoofer, 1200 watts - Black Ash
Applying a series of our key technologies, E-Sub powered subwoofers deliver exceptional sound quality, power and value in a wide range of demanding applications
E-Sub drivers employ our exclusive DMA technology to optimize the drivers' motor strength, ensuring linear behavior over a very long excursion range. Unlike typical steady-state modeling systems, DMA takes into account the dynamic shifts created by current flow and back EMF under real power conditions, with real program material. The payoff offered by DMA optimization is a driver that faithfully tracks its input signal, at all listening levels, leading to superior bass definition and dynamics.
The extreme mounting depth of the E-Sub driver is very deliberate. It permits wide gaps to exist between the three suspension elements (the rubber surround and the dual spiders), imparting exceptional mechanical stability over the driver's full excursion range. This further improves linearity, reduces distortion and enhances long-term reliability. In a stroke of engineering elegance, the E-Sub’s steel front mounting flange forms the entire front baffle of the finished product, while the driver’s back-plate is threaded and bolted to the rear wall of its enclosure for support.
To power these innovative drivers, we engineered a completely new switching amplifier with a regulated, switching power supply, making its chassis more compact, lightweight and efficient, while still delivering ample, clean power to fully exercise the E-Sub driver's performance envelope.
Conveniently controlled from the E-Sub cabinet’s top panel, the amplifier incorporates studio-grade signal processing to make adjustments a much more enjoyable experience than rear–mounted controls found on most powered subwoofers. An attractive cover hides and protects the controls during normal use.
The feature set has been designed to allow the use of E-Subs in a wide range of applications, from full home theater systems to dedicated two-channel music systems, to desktop audio workstations. Analog inputs are provided for unbalanced line-level signals or speaker level signals. Dedicated line outputs are included to make a bi-amped system arrangement with no additional hardware required. Useful in combating ground-related noise problems, a rear panel switch configures the line level inputs as grounded or isolated.
The E-Sub’s active crossover is a true two-way, 4th order Linkwitz-Riley design, with a low-pass filter feeding the subwoofer's amplifier and a high-pass filtered signal exiting its line outputs. When the on-board crossover is defeated, as is typical in a home theater installation, the line outputs deliver a pass-through, buffered signal identical to its line inputs, easily permitting multiple E-Subs to be interconnected in a ‘daisy-chain' arrangement. Switchable polarity and a fully variable phase control round out the signal processing section. All signal processing is performed in the analog domain, ensuring very low latency in critical applications.
Precision-built in JL Audio's U.S. factory, all E-Sub are individually performance-verified and tested to deliver years of listening enjoyment in your home audio or home theater system.
Finish: Black Ash
Grille finish: Black fabric
Enclosure Construction: MDF
Frequency Response (Anechoic)
25 - 116 Hz (±1.5dB)
-3 dB at 23 Hz / 120 Hz
-10 dB at 18 Hz / 165 Hz
Effective Piston Area (Sd)
58.78 sq in / 0.0379 sq m
131 cu in / 2.1 L
1200 W RMS short-term
Off, On or Automatic (Signal-Sensing)
Stereo or Mono (two RCA jacks)
Stereo or Mono (removeable plug)
Isolated or Grounded
Variable, from full mute to +15dB over reference gain
Filter Frequency Range
25 Hz - 130 Hz
Filter Defeat Function
0 or 180 degrees
Variable, 0- 280 degrees, referenced to 80 Hz
Extreme Low Frequency (E.L.F.) Trim
Stereo or Mono (two RCA jacks), High-Pass or Pass-Through
We offer a $15 flat rate Australia-wide shipping service, no matter how many items, however large or heavy items may incur a higher freight charge. If your item is subject to additional freight charges, this will be communicated to you when your order is processed. You are able to cancel your order and receive a full refund if you do not accept the additional freight charges.
If any damage occurs during shipping, it is the responsibility of the customer to notify us within 24 hours of the order arriving. This is a requirement of our freight insurance and we are unable to lodge any claims after 24 hours from delivery.
For express shipping, we offer a $30 flat rate Australia-wide shipping, however, larger/heavier items and remote areas may incur additional/higher fee which will be communicated with you at the time of processing your order.
Any order can be picked up in-store, located at 9 Strathaird road Bundall 4217, during our regular business hours for no freight or handling fees. We request 2-4 business to process the order but often will have it ready in less time. For security reasons, when picking up in-store you must present photo ID if you have paid online via credit card. The card holder must be the person picking up the order.
P.O. Boxes and Parcel Lockers
Unfortunately, GCCS are unable to ship to PO Boxes or Parcel Lockers for insurance reasons at this time, an alternate shipping option may be offered. Additional fees may be applicable.
GCCS do not ship internationally at this time.
Warranties, Returns and Refunds
All products sold by GCCS come with a minimum 12 month warranty as stipulated by Australian consumer law. If your product is defective please contact us to organise the return of the item. All products are sent back to the manufacturer for assessment and either repair or replacement. Manufacturers can take up to four weeks for goods to be repaired. All goods are subject to the manufacturers terms and conditions for repair or replacement. Please contact us for further information.
Any unopened item can be returned within 30 days of delivery for a refund less 20% re-stocking fee and freight costs. If the item has been opened, unpacked or used please advise us to discuss options. GCCS will pay freight charges on any orders returned if the order is the result of our error.
Refunds are paid back to you by the same method of payment for that order. Refunds can take 48-72 hours after the item has been received by our store.
To organise the return of an item, please contact us before sending the item to ensure prompt service.