Description
xMTX TL-DBE ThunderLink 2 Channel Line Level Converter
The TL-DBE is a 2-Channel Line Output Converter with Digital Bass Enhancement designed to integrate factory audio systems with aftermarket amplifiers. It corrects bass roll-off common in modern factory head units, delivers a clean preamp signal, and gives you precise low-frequency control without sacrificing factory functionality.
Features
- Corrects Bass Roll-off at Higher Volumes Typical of Many Factory Head Units
- Variable Bass Enhancement
- Low/High Level Input up to 40V
- Multiple Turn-on Options (DC / Rem / Audio)
- Selectable Load Resistance
- Selectable Ground Isolation
- Remote Level Control
COMPACT, INSTALL-FRIENDLY DESIGN
With a compact chassis measuring just over five inches wide, the TL-DBE is easy to mount in tight spaces such as under seats, behind panels, or near factory audio components. Its small footprint makes it ideal for clean, discreet installations without added complexity.
DIGITAL BASS ENHANCEMENT
Many factory systems reduce bass output as volume increases. The TL-DBE is designed to restore and enhance low-frequency response, allowing bass performance to remain full and impactful at higher listening levels. Variable digital bass enhancement lets you fine-tune how much low-end is added back into the signal, while the included external bass control allows quick, on-the-fly adjustment from the driver’s seat.
HIGH-VOLTAGE FACTORY SIGNAL HANDLING
The TL-DBE accepts both high-level speaker inputs and low-level RCA inputs, handling factory speaker outputs up to 40V RMS. This allows it to cleanly capture signal from a wide range of factory head units or factory-amplified systems and deliver a strong, distortion-free preamp output to aftermarket amplifiers.
FLEXIBLE TURN-ON AND OUTPUT CONTROL
Selectable load resistance and ground isolation options allow the TL-DBE to interface properly with a wide range of factory system designs while minimizing noise. Multiple remote output and turn-on modes, including DC offset sensing, audio signal detection, and +12V remote turn-on, ensure reliable operation across different factory architectures. Integrated gain controls and clip indicators make it easy to set clean output levels.
Specifications
|
Description |
2-CH Line Output Converter with Digital Bass Enhancer |
|
Maximum Input Level |
40Vrms/400W (20kΩ) |
|
Input impedance |
Selectable (20Ω, 60Ω 20kΩ) |
|
Preamp Outputs |
2 |
|
Maximum Output Level |
8.5Vrms |
|
Output impedance |
80Ω |
|
THD |
0.08% |
|
Signal to Noise Ratio |
> 88dB |
|
Frequency Response |
20Hz - 20kHz |
|
Recommended Fuse Rating |
1A |
|
Product Dimensions (HxWxD) |
1-1/8" x 5" x 3-7/8" (28.00mm x 126.00mm x 97.20mm) |
Â
For more information, please visit the manufacturer's website.
Shipping & Returns
xStandard Shipping
We offer a $15 flat rate Australia-wide shipping service, no matter how many items, however large or heavy items may incur a higher freight charge. If your item is subject to additional freight charges, this will be communicated to you when your order is processed. You are able to cancel your order and receive a full refund if you do not accept the additional freight charges. If any damage occurs during shipping, it is the responsibility of the customer to notify us within 24 hours of the order arriving. This is a requirement of our freight insurance and we are unable to lodge any claims after 24 hours from delivery.
Express Shipping
For express shipping, we offer a $30 flat rate Australia-wide shipping, however, larger/heavier items and remote areas may incur additional/higher fee which will be communicated with you at the time of processing your order.
In-store pickup
Any order can be picked up in-store, located at 9 Strathaird road Bundall 4217, during our regular business hours for no freight or handling fees. We request 2-4 business to process the order but often will have it ready in less time. For security reasons, when picking up in-store you must present photo ID if you have paid online via credit card. The card holder must be the person picking up the order.
P.O. Boxes and Parcel Lockers
Unfortunately, GCCS are unable to ship to PO Boxes or Parcel Lockers for insurance reasons at this time, an alternate shipping option may be offered. Additional fees may be applicable.
International Addresses
GCCS do not ship internationally at this time.
Warranties, Returns and Refunds
All products sold by GCCS come with a minimum 12 month warranty as stipulated by Australian consumer law. If your product is defective please contact us to organise the return of the item. All products are sent back to the manufacturer for assessment and either repair or replacement. Manufacturers can take up to four weeks for goods to be repaired. All goods are subject to the manufacturers terms and conditions for repair or replacement. Please contact us for further information. Any unopened item can be returned within 30 days of delivery for a refund less 20% re-stocking fee and freight costs. If the item has been opened, unpacked or used please advise us to discuss options. GCCS will pay freight charges on any orders returned if the order is the result of our error. Refunds are paid back to you by the same method of payment for that order. Refunds can take 48-72 hours after the item has been received by our store. To organise the return of an item, please contact us before sending the item to ensure prompt service.
- Choosing a selection results in a full page refresh.